CCTV Chimney Inspections
The only camera designed by a Chimney Sweep for a Chimney Sweep!
The Inspector Eye system has been developed to enhance the inspection of chimneys and flues using two cameras, one for side viewing and one for forward viewing.
The complete system is contained in an aluminium briefcase measuring 460mm wide x 370mm high x 210mm deep and measuring only 140 Kgms.
The system is powered from 12v DC by a regulated PSU and comes with a 1.5 metre mains cable.
The camera is supplied with 20 metres of cable permanently attached and is screw fixed to standard chimney rods, replacing the usual brush. The required length of cable is then easily pulled from it's reel as needed.
To rewind the camera cable into its reel, you simply insert the supplied winding handle into a slot at the centre of the reel and turn until the cable is rewound.
Camera
Features:
- Front & side viewing simultaneously
- Low light colour
- Excellent picture quality
- Digital signal processing
- Small compact design
Description:
The cameras use a set of bright LED's to enable them to be used without the aid of either natural or artificial light allowing illumination of objects up to five metres away.
Specifications:
- CCD: 1/4" CCD Colour
- Lens: 3.6mm 92 degrees
- TV Lines: 380TVL
- Min lux: 0 lux (LED's on)
- Supply: 12V DC @ 150mA
- Iris: Electronic 1/100000a
- Housing: Machined high impact plastic
- Size: 60mm diameter
- Weight: 0.6 kgs
TFT Monitor
Features:
- Colour TFT Monitor
- High resolution 269,568 pixels
- Brightness, contrast and volume controls
- Video Left/Right and Up/Down reverse picture switch
- 2xvideo outputs, 1 video input
- Dimension (WxHxD) 195x130x35
- Supply 12v DC @ 500mA.
